Versions Compared

Old Version 1

changes.mady.by.user Niko Puruskainen

Saved on

compared with

New Version 2

changes.mady.by.user Niko Puruskainen

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Date and Time settings are now part of First Time Setup Wizard. In case Setup Wizard at is skipped, date and time query will popup right after skip is selected.
  • About ~40s wait at black screen can be experienced during BMDE station installation. This is known issue and expected to be enhanced in later release.
  • New green indicator indicating sent report can be seen in Reports. Previously such indicator wasn't shown. If report send fails for some reason, report checkbox will turn red. Re-send for such report can be re-tried.
  • Currently Blancco Management Portal (BMP) backup creation can fail due the size of the backup. Reason is that BMP backup has key value limitation. Workaround to support larger backup sizes in future is under work. Such limitation does not exist in Blancco Management Console (BMC).
  • BMDE file export to USB stick is enhanced in this release (iOS firmwares, workflows etc.). In case there's experienced any issue in USB export it's recommended to use the "Click here to remove USB media" option found from BMDE Erasure view's Status bar/Login view before USB stick is de-attached.
  • "Export selected" and "Import" buttons for firmware files are added to System Settings -> Synchronization Service (Server) -> Shared Files. Please note that only selected and "completed" (completely downloaded and verified) firmwares can be exported. It'll take a moment before imported firmwares appear on the shared list as system is processing them first.
  • Starting with this release Custom fields can be queried at login.
  • In UI in drop down menus the current selection is now shown in bold.
  • Workflow auto-start works now without wait, right after reconnecting cable after previous workflow has ended. In case any reports are generated those should be cleared before reconnecting device.
  • Processing of iPads in ports that are mixed up in the internal wiring is currently not supported. This can be observed with an additional device card that can appear in the UI. •
  • New iOS/iPadOS 17, 17.0.1 and 16.7 are verified with this release.
  • iPhone 15 series is not yet supported in this release as devices not available for the team by the release date.
  • In iOS 17, for Volume Keys test - Keys pressed quickly does not PASS the test. Once key is pressed wait for 1 second and then press other key.
  • This applies for processors using Diagnostics application for Apple with Bandwidth Scalability feature enabled. Pre-requisite is that Wi-fi setting should be turned ON and connected to network to perform. Wi-fi test has a message on app which will ask user to enable Wi-fi and connect to Wi-fi. User needs to enable Wi-fi and connect to respective network to perform test successfully.
  • Note: If users want to avoid entering password to Wi-Fi, then in the Workflows the ‘Wi-Fi Config’ node should be linked before Diagnose/Run Diagnose node. Wi-fi Config node will push Wi-fi profile in iPhone. User will need to install profile by navigating to Settings app in iPhone.

...