Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • The maximum number of licenses that can be written to the USB stick is 250. In addition, the user cannot write more licenses than there are available in the Blancco Cloud account.
  • License validity date:
    • Version < 1.3.1: The licenses are valid for 60 days after creating the USB stick. The validity date for the licenses is carried over from the Blancco Cloud account used during the process and will be used if the expiry is sooner than 60 days.
    • Version >= 1.3.1: The license validity date is carried over from the Blancco Cloud account used during the process.
  • The user must have an existing Blancco Cloud account before creating the bootable USB drive.
  • Only Blancco Drive Eraser Enterprise Volume Edition licenses are supported.

  • Report sending to Management Console is not supported. Report must be stored to a USB media and imported manually to Management Console.

...


UI Tabs
UI Tab
titleRequirements
Blancco USB Creator

User should have administrator rights

Windows 7 or newer

1GB or more free space on the system disk

1GB or larger USB memory stick - Formatted (FAT, FAT32, NTFS)

Network connection which can connect to Blancco Cloud and existing Blancco Cloud account is required
Blancco Drive Eraser Enterprise Volume Edition 6.13.0 or later

USB Stick must have a valid serial number

Blancco Drive Eraser
USB-port/adapter for USB-booting
x86 architecture machine
1 GB of RAM in most cases (erasing servers with 2+ drives requires more RAM)
SVGA display and VESA compatible video card for graphical user interface
Physical USB drive

Minimum of 8 characters

Characters can't all be the same

Allowed characters are A-Z, a-z, 0-9

The visible serial number can be checked by connecting the USB drive to the PC and running the "get-disk" command in PowerShell:

Image Added


The drive also needs a listed manufacturer, a drive letter assigned by Windows, and the size needs to be more than 1GB.


Following USB drives were tested by Blancco:

VendorModel
KingstonHyperX Savage 64GB
KingstonDataTraveler G4 64GB
KingstonDataTraveler 104
KingstonDataTraveler 100 G3 64GB
KingstonDataTraveler SE9 64GB
SandiskExtreme Go USB 3.1 64GB
SandiskExtreme GO USB 3.2 Flash Drive-SDCZ810-064G
PNY16 and 32GB
Kanguru32 and 64GB
UI Tab
titleCreating USB

Step by step instructions

To start using the software, run the executable with administrator rights. If the application is run without admin rights, it prompts the user for permission elevation to admin level.

  1. The first screen displays the license agreement (EULA). Accept it to continue.
    Image Modified
  2. Insert the USB stick to the machine. If the USB stick is already connected, reconnect it.
    Image Modified
  3. Once the USB stick has been detected, press “Continue” to move to the next step in the process.
    Image Modified
  4. Click “Browse” to open the Window’s File Explorer and use it to select the ISO image. Once the ISO image has been selected, continue the process.
    Image Modified
  5. Sign in to your Blancco Cloud account.
    Image Modified
  6. Once signed in, select the number of licenses to transfer to the USB stick. The default amount is one (1) license. When “Continue” is pressed the USB drive creation process is started and the licenses are consumed from Blancco Cloud.
    Image Modified
  7. Wait until the bootable USB stick has been created.
    Image Modified
  8. Once finished, the following screen is displayed, and the USB stick is ready for use.
    Image Modified