Page History
In some cases, it is possible that the built-in Network Interface Card (Ethernet or Wireless network adapter) of a machine, isn’t supported by the Blancco Drive Eraser (Blancco 5.5.0 and newer releases) has driver support for the WLAN adapters listed below. Note that all of the devices have not been tested in practice, and in problem cases WLAN related settings should also be checked (in addition to the driver support list).
...
software.
The most common reason for this is that the Blancco Drive Eraser kernel doesn't contain the required driver* to correctly support the NIC or the driver which is being used is a generic driver and does not adequately support the NIC. As a result, the NIC is either not detected or detected but not working.
In the case of an unsupported Network Adapter, we recommend the use of a USB-to-NIC adapter (Ethernet or Wireless) as a workaround.
| Following USB Ethernet Adapters has been tested with Blancco Drive Eraser |
|---|
| TRENDnet TU2-ET100 - Ethernet Adapter |
Belkin / F5D5055 Gigabit USB 2.0 Ethernet Adapter |
| A-LINK / NA1GU Gigabit USB 2.0 Ethernet Adapter |
| Startech.com USB 3.0 to Gigabit Ethernet Adapter USB31000S |
| KY-DM9601 2011-07-668A0 Ethernet Adapter |
CableCreation Gold Plated USB to RJ45 Gigabit Ethernet Adapter |
| CableCreation 3-Port USB 3.0 Hub with Gigabit Ethernet Adapter |
| Zactek 3-Port USB 3.0 Hub with Ethernet USB Hub |
| TP-Link Ethernet Adapter, Foldable USB 2.0 to 10/100 Ethernet LAN Network Adapter |
| TP-Link USB 3.0 to Gigabit Ethernet Network Adapter UE300 |
| Fuj:tech PRO Dock USB-C-adapter |
*Some drivers are closed source and can’t be included into the Drive Eraser software.
...