It In some cases, it is possible that Blancco Drive Eraser doesn't offer support for the the built-in Network Interface Card (Ethernet or Wireless network adapter) of the Machine where a machine, isn’t supported by the Blancco Drive Eraser is bootedsoftware.
The most common reason for this is that the Blancco Drive Eraser Kernel doesn't contain the required driver for * to correctly support the NIC or the used driver which is being used is a generic driver and does not adequately support the NIC adequately. As a result, the NIC is either not detected or detected but not working.
In the case of an unsupported Network Adapter in Blancco Drive Eraser, we recommend to the use an of a USB-to-NIC adapter (Ethernet or Wireless) as a workaround.
Following USB Ethernet Adapters has been tested with Blancco Drive Eraser.
TRENDnet TU2-ET100 - Ethernet Adapter
Belkin / F5D5055 Gigabit USB 2.0 Ethernet Adapter
A-LINK / NA1GU Gigabit USB 2.0 Ethernet Adapter
Startech.com USB 3.0 to Gigabit Ethernet Adapter USB31000S
*Some drivers are closed source and can’t be included into the Drive Eraser software.