How to change license option and configure Management Console details to Blancco Mobile Diagnostic & Erasure.

Created dateUpdated dateAffects versionFix version

 


All

Description

How to change license option and configure Management Console details to Blancco Mobile Diagnostic & Erasure.

Step by step instructions


  1. Log In to the Blancco Mobile Diagnostic & Erasure.
  2. Click on the setting icon in the top right corner. It will open a Blancco Mobile Diagnostic & Erasure Settings Windows.

  3. Click on the General Tab and go to the Blancco Management Console Settings
  4. Fill in the below details
    1. Hostname – cloud.blancco.com 
      Note - If using Blancco Management Console then enter the IP/URL of the Blancco Management Console.
    2. Port - 443
      Note - If using Blancco Management Console, enter the port number of the Blancco Management Console
    3. Username – “Enter_MC_Username” 
    4. Password – “Enter_Password”

  5. Click on Apply and Ok.

    If Connection status is Green then Blancco Mobile Diagnostic & Erasure is successfully connected to Blancco Management Console.


  1. Connect the HASP key to the Blancco Mobile Diagnostic & Erasure machine.
  2. Login to the Blancco Mobile Diagnostic & Erasure machine.
  3. Go to the setting.
  4. Click on the General Tab and go to the License settings
  5. For Use licenses from, select the HASP option from the drop-down menu


If you have any issues please contact the Blancco Support Team at support@blancco.com.