---
title: "Erasure does not start (stuck at 0%, error messages, unresponsive software, etc.)"
canonical: "https://support.blancco.com/space/KB/11633117/Erasure+does+not+start+(stuck+at+0%25%2C+error+messages%2C+unresponsive+software%2C+etc.)"
format: markdown
---
| **Created Date** | **Updated Date** | **Affects versions** | **Fix version** |
| --- | --- | --- | --- |
| 2/10/2017 | 12/8/2020 | All | N/A |


<span style="color: #000000">After starting an erasure, in case your erasure does not start (no activity or stuck at 0%) or errors start counting under the drive (Erasure-step, Advanced-mode) or the software seems unresponsive, the problem can relate to one of the following reasons:</span>

<span style="color: #000000">A firmware erasure is ongoing:</span>

- <span style="color: #000000">Check if the drive has remapped sectors (there is a “REMAPPED: X” yellow icon under the drive, X > 0) and if the erasure option “Erase remapped sectors” is enabled: if this is the case, the first step that is started is a firmware command that erases the remapped sectors. The command duration can vary based on the drive size and interface, from a few minutes (on new SSDs) to a few hours (on large HDDs). During the time of the erasure, the erasure progress will be stuck at 0% and it is recommended not to interact with the drive (do not unplug the drive under any circumstance, do not attempt to pause or cancel the erasure, do not attempt to refresh the list of drives… most of these recommendation are at least valid for any Drive Eraser version prior 6.3.0).</span>
- <span style="color: #000000">Since v6.3.0, there is an animation indicating that a firmware command is ongoing.</span>

<span style="color: #000000">Bad cable connection:</span>

- <span style="color: #000000">Check that the drive is properly connected to the machine (power cable and interface cable). Lack of proper connection can result in read/write errors.</span>

<span style="color: #000000">"OPAL" Lock:</span>

- <span style="color: #000000">"OPAL" is a misnomer for a Trusted Computer Group (TCG) security feature available on data storage devices (</span>[<span style="color: #000000">OPAL security feature</span>](https://en.wikipedia.org/wiki/Opal_Storage_Specification)<span style="color: #000000">). TCG as variants such as “TCG Opal” or “TCG Enterprise” (other variants exist).</span>
- <span style="color: #000000">OPAL locks can be enabled by the computer manufacturer or by the computer owner and can prevent all read/write operations on the drive:</span>
  - <span style="color: #000000">Blancco Drive Eraser supports TCG detection and TCG Crypto Erase commands on ATA drives since v6.8.0 and on SCSI/SAS drives since v6.11.0. A drive that supports TCG commands may display the icons “TCG OPAL”, “TCG ENTERPRISE”, “TCG OPALITE”, “TCG PYRITE” or “TCG RUBY”. A drives that is locked via the TCG security feature may display the icon “TCG LOCKED” or “TCG PASSWORD”.</span>
  - <span style="color: #000000">If an OPAL lock is present on the drive level, it has to be removed before an erasure is attempted. In order to remove this security feature, a PSID Revert command has to be issued to the drive. This command returns the drive to its factory state where it can be erased as normally. The PSID Revert command requires a software tool, as well as an access to the PSID (Physical Security ID) which is printed on the drive’s label. The software tool that issues the PSID Revert command depends on the drive manufacturer/model. Below is a list of tools that are required for specific manufacturer's drives:</span>
    - <span style="color: #000000">Western Digital/SanDisk drives: </span>[<span style="color: #ff0000">Crypto Erase Tool</span>](http://kb.sandisk.com/app/answers/detail/a_id/14851/~/what-is-crypto-erase%3F)
    - <span style="color: #000000">Seagate drives: </span>[<span style="color: #ff0000">SeaTools</span>](http://www.seagate.com/gb/en/tech-insights/how-to-ise-your-drive-master-ti/)
    - <span style="color: #000000">Samsung drives: </span>[<span style="color: #ff0000">Samsung Magician</span>](http://www.samsung.com/semiconductor/minisite/ssd/download/tools.html)
    - <span style="color: #000000">Intel drives: </span>[<span style="color: #ff0000">SSD Pro Administrator</span>](https://downloadcenter.intel.com/download/26073/Intel-SSD-Pro-Administrator-Tool)
    - <span style="color: #000000">Micron/Crucial drives: </span>[<span style="color: #ff0000">Storage Executive</span>](http://www.crucial.com/usa/en/support-storage-executive)
    - <span style="color: #000000">Kingston drives: </span>[<span style="color: #ff0000">SSD Manager</span>](https://media.kingston.com/support/downloads/KSMv100x_UG_20151022.pdf)
    - <span style="color: #000000">SK Hynix drives: </span>[<span style="color: #ff0000">Drive Manager</span>](http://ssd.skhynix.com/ssd/download/product/easykit/SK_hynix_Drive_Manager_1.1.0_Win_x86_User_Guide.pdf)
    - <span style="color: #000000">If these links do not work, try googling for example: “PSID Revert Crucial” to get information on the procedure for Crucial drives.</span>
  - <span style="color: #000000">On some occasions, if the drive has an OPAL lock, the first erasure (if firmware-based) will fail, but after rebooting the machine the second erasure (also firmware-based) will succeed.</span>

  
<span style="color: #000000">Other reasons may exist and they should be checked case by case. Make sure that you sav</span><span style="color: #003366">e </span>[<span style="color: #003366">a Blancco Drive Eraser / Blancco 5 issue report</span>](https://go.docs.blancco.com/wiki/spaces/KB/pages/11632991)<span style="color: #003366"> </span><span style="color: #000000">after witnessing the problem and then contact the Blancco Technical Support.</span>

> Macro (__confluenceADFMigrationUnsupportedContentInternalExtension__)