Page History
Blancco LUN Eraserに関連する最も一般的で基本的な問題には次のようなものがあります。
- ユーザーが管理者ではなく、LUNの消去コマンドが管理者として実行されていない。
- このソフトウェアは、ドライブ全体を消去処理するように設計されています。まず最初にドライブ上のパーティションとファイルシステムを除去して、書き込みが可能な領域全体を解放します。 その後、選択された消去規格に従って、セクタごとにドライブ上の書き込み可能な領域全体を上書きします。Windows環境では、デバイスに直接書き込むことができる管理者権限が必要です。したがって、管理者としてソフトウェアを開始する必要があります。
- .NETがWindows環境にインストールされていない。
- 完全なレポート機能を使用するには、.NET 2.0以降が必要です。
- Blancco LUN Eraserのインストーラーがユーザーにシステムの再起動を要求するが、再起動が実行されていない。
- ソフトウェアから要求された場合は、システムを再起動します。
The most common basic Blancco LUN Eraser related issues are:
- The user is not an administrator and the LUN erasure command is not run as an administrator:
- The solution is designed for shredding whole drives. It will first remove any partitions and file systems on the drive to free up the whole write-able area. After that it will overwrite the whole write-able area on the drive sector by sector according to the selected erasure standard. In Windows you need to have administrator rights to be able to write directly to a device. Hence, you need to start the solution as administrator.
- .NET is not installed on Windows:
- .NET 2.0 or later required to be able to use full reporting functionality.
- Blancco LUN Eraser installer prompts a user to reboot the system, but the user does not do this:
- Reboot the system if the software ask to do so.