Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Hardware requirements and recommendationsハードウェア要件および推奨事項:

Read more detailed requirements from the Blancco Mobile Device Eraser user manual!

詳細な要件については、Blancco Mobile Device Eraserのユーザーマニュアルを参照してください。


最小推奨MinimumRecommended
CPUx64 processorx64 プロセッサーx64 Quad core processorクアッドコアプロセッサー
メモリ (RAM4 16 GB8+ GB16 GB以上
ハードドライブHard drive20 GB100 + GBGB以上
USB portポートUSB 2.0 compatible port互換ポートPCI Express USB adapterアダプター
Displayディスプレイ解像度 1280 * 1024 resolutionFullHD フルHD (1920 * 1080) or better以上
インターネット速度 1Mbps以上有線接続 (20Mbps以上InternetOver 1Mb/sWired connection (over 20Mb/s)


Blancco Management Console requirementsConsole要件:

  • If Blancco Management Console is used, version 3Consoleを使用する場合は、バージョン3.3.2 or later is required2以上が必要
  • 検査レポートはManagement Diagnostics reports are supported in Management Console 3.3.5 and later5以上でサポート
     

Firewall requirementsファイアウォール要件

  • iOSデバイスを消去するにはインターネット接続が必要です。
  • ファイアウォールが以下のAppleサーバーをブロックしていないか確認してください。
  • Internet connection is required to erase iOS devices
  • Make sure that there is no firewall blocking the Apple servers:
    • itunes.apple.com
    • appldnld.apple.com
    • appldnld.apple.com.edgesuite.net
    • gs.apple.com
    • gg.apple.com
    • 17.151.36.30
    • 17.171.36.30
       

USB related requirementsUSB関連の要件:

  • 外部電源を備えたUSBハブUSB hubs with an external power supply
    • 500mA/port is recommended
    • Note that every single device connected to a USB port (USB stick, HASP, keyboard, mouse) consumes power and "performance resources" 
  • PCI Express USB adapters
    • Standard USB adapters integrated to motherboards do not usually have sufficient bandwidth for handling a high number of concurrent device connections
    • Use PCI Express USB adapters to allow more devices to be processed simultaneously
    • PCI-e USB 3.0 adapters with the NEC Renesas uPD720201 or uPD720202 chipset are recommended
    • PCI-e adapter card should get power from the PC power supply and NOT through the motherboard
  • Connect a proper amount of devices per USB bus
    • It is recommended to connect max. 20 devices per USB bus
    • ポートを推奨します。
    • USBポートに接続されたすべてのデバイス (USBメモリ、HASPキー、キーボード、マウス) が電力および「パフォーマンスのリソース」を消費することに注意してください。 
  • PCI Express USBアダプター
    • マザーボードに搭載された標準のUSBアダプターには、一般的に、同時に多数のデバイス接続を処理するための十分な帯域幅がありません。
    • PCI Express USBアダプターを使用して、より多くのデバイスを同時に処理できるようにします。 
    • NEC Renesas uPD720201あるいはuPD720202チップセットを搭載したPCI-e USB 3.0アダプターを推奨します。
    • PCI-eアダプターカードは、マザーボード経由ではなく、PCの電源から電力を得る必要があります。
  • USBバスごとに適切な数のデバイスを接続
    • 接続するデバイスはUSBバスあたり20台までにすることを推奨します。
  • 高品質のUSBケーブルを使用
    • iOSデバイスでは、Appleが認定し、「iPod/iPhone/iPad用」のロゴが付いているケーブルを使用します。
    • USB-Cケーブルを使用するAndroidデバイスの場合は、USB-C仕様に準拠したケーブルを使用します。準拠していないUSB-Cケーブルは、モバイルデバイスとPCに損傷を与える可能性があります。
    Use high-quality USB cables
    • For iOS devices, use cables that Apple has certified and that come with the "Made for iPod/iPhone/iPad" logo
    • For Android devices with USB-C cable, use cables that are compliant with the USB-C specification. Non-compliant USB-C cable can damage the mobile device and the PC.