In some cases, it is possible that the built-in Network Interface Card (Ethernet or Wireless network adapter) of a machine, isn’t supported by the Blancco Drive Eraser software.
The most common reason for this is that the Blancco Drive Eraser Kernel kernel doesn't contain the required driver* to correctly support the NIC or the driver which is being used is a generic driver and does not adequately support the NIC. As a result, the NIC is either not detected or detected but not working.
In the case of an unsupported Network Adapter, we recommend the use of a USB-to-NIC adapter (Ethernet or Wireless) as a workaround.
|Following USB Ethernet Adapters has been tested with Blancco Drive Eraser|
|TRENDnet TU2-ET100 - Ethernet Adapter|
Belkin / F5D5055 Gigabit USB 2.0 Ethernet Adapter
|A-LINK / NA1GU Gigabit USB 2.0 Ethernet Adapter|
|Startech.com USB 3.0 to Gigabit Ethernet Adapter USB31000S|
|KY-DM9601 2011-07-668A0 Ethernet Adapter|
CableCreation Gold Plated USB to RJ45 Gigabit Ethernet Adapter
|CableCreation 3-Port USB 3.0 Hub with Gigabit Ethernet Adapter|
|Zactek 3-Port USB 3.0 Hub with Ethernet USB Hub|
|TP-Link Ethernet Adapter, Foldable USB 2.0 to 10/100 Ethernet LAN Network Adapter|
*Some drivers are closed source and can’t be included into the Drive Eraser software.