You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

By default Blancco Drive Eraser will erase all connected drives. You can select the drives to be erased individually from the "Advanced" view in Blancco Drive Eraser User Interface. In order to erase a specific drive, do the following:

  1. Boot Blancco Drive Eraser software on the machine where the target drive is located.
  2. When Blancco Drive Eraser is loaded and the user interface is visible, navigate to "Advanced" view found from middle-right part of the screen.
  3. Un-select the drive(s) you do NOT want to erase.
  4. Start the erasure.

Note: 1 license is consumed per each erased drive!

  • No labels