Page History
作成日 | 更新日 | 影響を受けるバージョン | 修正バージョン |
---|---|---|---|
|
| Drive Eraser 全て | N/A |
問題事象
AppleブランドのSSDがデータ消去後に使用できない状態になる。該当するSSDは「SMxxxxF」という機種名をもち、「xxxx」の部分は容量に対応します。
...
ディスクモデル | システムメーカー | システムモデル | ディスクファームウェアバージョン |
---|---|---|---|
APPLE SSD SM0256F | Apple Inc. | MacBookAir6,1 | UXM2JA1Q |
APPLE SSD SM0512F | Apple Inc. | MacBookAir7,2 | UXM2JA1Q |
APPLE SSD SM0256F | Apple Inc. | MacBookPro11,1 | UXM2JA1Q |
APPLE SSD SM0512F | Apple Inc. | MacBookPro11,2 | UXM2JA1Q |
APPLE SSD SM1024F | Apple Inc. | MacBookPro11,3 | UXM6JA1Q |
APPLE SSD SM0512F | Apple Inc. | MacBookPro12,1 | UXM2JA1Q |
APPLE SSD SM1024F | Apple Inc. | iMac14,2 | N/A |
原因
This issue is caused by non-standard firmware available on these SSDs. Affected drives are not capable of executing "Secure Erase" or "Enhanced Secure Erase" firmware based commands properly, which leads to a scenario where the disk is no longer being detected after these command have been executed.
該当するSSDの非標準的なファームウェアが原因です。ファームウェアベースのコマンドである「Secure Erase」と「Enhanced Secure Erase」をこれらSSDが適切に実行できないため、実行後にディスクが検出されなくなるという現象が発生します。
解決策
この問題の発生を防ぐためにはSecure EraseとEnhanced Secure Eraseを使用しない消去設定をお勧めします。これはたとえばNIST 800-88 Purgeを使用して実現できます。