Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

新方式のライセンスを有効化するにあたって、お客様は事前に「プロダクトキー」とアクティベーション手順を含む電子メールを受け取っていなければなりません。

アクティベーションの方法としては「オンライン」と「オフライン」の二種類が選択可能となっています。オンラインアクティベーションの場合、HASPキーを接続した作業用マシンを直接インターネットに接続する必要があります。オフラインアクティベーションの場合、作業用マシンをインターネットに接続する必要はありませんが、リクエストファイル (C2Vファイル) を生成した後、他のマシンを使うなどしてインターネット上のライセンスアクティベーションポータルにアップロードする必要があります。ファイルをアップロードするとライセンスファイル (V2Cファイル) がダウンロード可能になります。ダウンロードしたV2CファイルをHASPキーに対して適用することでライセンスアクティベーションが完了しますが、その際はインターネット接続は必要ありません。

オフラインアクティベーションの方法は

To activate licenses based on the new licensing schema, you will receive an email, which contains the product key(s) for the activation. The email also includes steps for activating your product key(s). You can choose online or offline activation. The online activation requires an Internet connection and a HASP-key needs to be connected to the machine where the activation will be done. The offline activation doesn't require an Internet connection, but you will need to generate a request file (C2V-file) and upload it to License Activation Portal. After uploading the file, you will receive a response file (V2C-file) which can be activated to a HASP-key without an Internet connection.

This article describes how the Online activation is done, for the Offline activation see this article "a Japanese KB - Offline EMS license activation to a HASP key" .

Note! For the Online activation you will need:

のほうをご覧ください。

注意 オンラインアクティベーションを行うには次の前提条件があります。

  • Windows OSであること。
  • Windows operating system
  • HASP HLドライバーがインストール済みであること。これは
  • HASP HL drivers. Drivers can be downloaded from Gemalto download site.
  • 32-bit Java
  •  からダウンロード可能です。
  • 32ビット版のJavaがインストール済みであること。

手順

  1. 作業用のコンピュータにHASPキーを接続。
    1. 初めてHASPキーを接続した場合、ドライバーのインストールが自動的に始まりますので、インストールが正常に完了するのを見届けてから次のステップに進んでください。
  2. ライセンスアクティベーションポータルを開く。リンクは納品時のEメールに記載されています。
  3. 納品時のEメールに記載されているプロダクトキーを使ってログイン。
  4. Plug in HASP-key to the computer where licenses will be activated
    1. If you have not activated licenses before on the computer, the system will install drivers for the HASP-key. Please wait until the drivers has been installed
  5. Access the License Activation Portal (the link is in the email)
  6. Log in by using your unique product key found in the delivery email
  7. Choose "Online activation" を選択。
    1. 最新の実行環境がインストールされていない場合はメッセージ
    2. If you are missing the latest run-time environment you should see "Download and install the latest RTE installer by clicking here: EXE" message on the screen.
      が表示されます。
    3. Click on the "EXE" to download and save the latest RTE
    4. Open "Command Prompt" as an administrator
    5. Navigate to the folder where you saved the RTE installer
    6. をクリックして最新の実行環境 (RTE) インストーラをダウンロード。
    7. 管理者としてWindowsの「コマンドプロンプト」を開く。
    8. RTEインストーラを保存したフォルダへ、コマンドプロンプトで移動。
    9. コマンド Run command "haspdinst.exe /i" to install the RTE (without quotation marks)
      " を実行してRTEをインストール。※実際にはダブルクォート " は入力不要です。
  8. From the "Key Activation" window, choose ウィンドウで"Existing Key" and your HASP-key and click を選択して "Activate" をクリック。
  9. アクティベーション処理が完了すると Once the activation has been completed, you should see message "License activated successfully on key XXX"
    というメッセージが表示されます。


HASPキー内のライセンスの詳細を調べたい時は次のページを参照してください。

 LDK/EMSライセンシングへの移行後にHASPキーからライセンス情報を確認するTo check the license details on your HASP-key, follow instructions provided here: How to check license information from a HASP-key after migrating it to EMS licensing?