Page: "Certificate validation failed" error shown in Drive Eraser when licensing from Blancco Cloud (cloud.blancco.com) Page: "Not enough Asset licenses" when saving an erasure report Page: 100 Remapped Sectors on multiple drives of the same make and model Page: Apple SSD is no longer being detected after erasure with Drive Eraser Page: Black Screen when booting with Blancco Drive Eraser Page: Boot issues with Blancco Drive Eraser Page: Booting Blancco Drive Eraser / Blancco 5 from a CD or USB fails Page: Certain Cisco M4 (and newer) rack servers fail to boot due to signature error Page: Drive Eraser SB ISO fails to boot on Secure Boot enabled devices Page: Drive model is shown as SandForce{200026BB} and capacity of 33KB Page: Erasing SATA drives in caddies with interposers/adapters Page: Erasure does not start (stuck at 0%, error messages, unresponsive software, etc.) Page: Erasure failed due to firmware-based erasure commands failing Page: Erasure fails due to Erasure target is offline Page: Erasure verification fails Page: Fail to save report, USB stick not detected Page: Freeze Lock Removal: what it is and how to remediate possible issues Page: GPT PMBR size mismatch is displayed when attempting the erasure of a Chromebook Page: Hard Drive contains password following a failed erasure with Drive Eraser Page: Hard drive(s) not detected with Drive Eraser Page: HGST SAS drives fails verification on Fujitsu Primergy RX series servers Page: How to achieve purge level erasure on Lenovo devices with NVMe drives Page: Issues occurring during with the drive hotplug Page: Liteon CV5-8Q256-HP SATA SSD fails the erasure with Blancco SSD method Page: Management Console will not import erasure reports from Drive Eraser generated with Enterprise USB Enablement tool Page: Not enough licenses to start erasure Page: NVMe Drive hotplug on a machine installed with Blancco Drive Eraser 7 doesn't work. Page: Report sending fails after running the erasure Page: Samsung PM951/PM981 NVMe SSD erasure fails with error: “FORMAT UNIT command failed." Page: Smart Array RAID controllers (CCISS): Erasure verification failures Page: Two erasure licenses consumed when erasing Apple computers with certain NVMe drives Page: USB HW Test records the port type incorrectly e.g. 3.0 recorded as 2.0 - Drive Eraser 6.10 or newer Page: Why does my SSD/NVMe drive not allow for erasure or fails the erasure? Page: WiFi HW test failing on known supported Wifi card Page: WiFi not working on Drive Eraser despite SSID and credentials being correct